The Photonic Universe 2kW Uninterrupted Power Supply (UPS) System with 2.4kWh energy storage is a dependable backup power solution designed for mains-powered, off-grid, solar, and portable energy applications. Delivering stable AC electricity when you need it most, this UPS is ideal for homes, offices, IT setups, and remote locations where continuous, uninterrupted supply for computers, Wi-Fi, broadband, small office appliances, and essential electronics is critical.
In a mains-powered setup, this UPS ensures appliances remain unaffected by power interruptions. While mains power is available, it supplies electricity directly to your devices while keeping the batteries charged. If the grid becomes unstable or cuts out, the system instantly switches to battery power, guaranteeing seamless operation. Once mains power returns, the UPS automatically transfers the load back without disruption.
For generator-powered systems, this UPS provides continuous electricity even when the generator is turned off. By running the generator only at optimal times to charge the batteries, users achieve significant fuel savings and reduced wear on equipment, making it a cost-effective choice for off-grid living and commercial sites.
This UPS also supports direct solar panel input without requiring extra charge control equipment. Connect a suitable solar array and benefit from renewable energy, reducing reliance on the mains grid or minimising generator runtime for off-grid applications.The system is equally effective as a portable power solution. Simply charge the batteries from mains electricity, then transport the UPS to an off-grid location to supply stable power on demand - perfect for temporary setups, outdoor use, or mobile applications.
With its external battery bank, the system offers straightforward expansion, replacement, and flexible installation in irregular spaces. This makes it a reliable, long-term energy solution that adapts to both residential and professional needs.
Package Includes: Main UPS unit, 2x 100Ah gel deep-cycle batteries, 1m tinned copper battery cables, a battery linking cable, a thermal over-current circuit breaker & loose ring terminals for crimping.
- 2kW UPS system: delivers seamless AC backup for larger loads
- 2.4kWh battery storage: extended runtime for essential appliances
- Mains-powered operation: instant switch to battery during outages
- Off-grid compatible: reduces generator run time and fuel costs
- Portable design: charge at home and use in off-grid locations
- Solar charging support: connect a solar array without extra equipment
- External battery bank: simple to expand, replace, or install flexibly
- Ideal for IT & office equipment: keeps computers, Wi-Fi & small electronics running reliably
UPS Specifications:
- Nominal battery voltage: 24V
- Continuous power output: 2000W / 2000VA
- Surge power: 4000VA
- Output voltage: 230V AC
- Output frequency: 50Hz /60 Hz
- Output waveform: Pure sine wave
- Maximum solar input power: 1200W
- Maximum open circuit solar input voltage: 80V
- Maximum solar charging current: 50A
- Maximum mains AC charging current: 20A
- Maximum combined charging current: 50A
- Peak efficiency: 93%
- Operating temperature: -10C to 50C
- Supplied with:
- 1.5m AC power cable with 3-pin UK plug
- PC connection cable and PC software CD
- Size: 32cm x 22.5cm x 8.8cm
- Weight: 5.5kg
Battery Specifications (per battery):
- Nominal voltage: 12V
- Nominal capacity: 100Ah (10h rate) / 108Ah (20h rate)
- Maximum charging current: 20A
- Self-discharging rate: <1% per month
- Cycle lifetime at 30% D.O.D.: 1200-1300
- Pressure control: safety valve installed
- Terminal type: F13 (bolts and washers included)
- Operating temperature: from -10C to +50C
- Size: 331mm x 173mm x 217mm
- Weight: 30.3 kg
Please Note: The inverter uses predictive cooling logic to activate the fans, and is not suitable for installing in locations where silence is required.
Code: UPS-2K-24